Standard pump
Description:
It is the simplest model with the inlets and outlets located on the base of the opposite side of the drive shaft.
- Inlets and outlets diameter Ø = 4 mm and center distance of 15 mm
- 2 holes to fix the pump to the distributor and/or motor: Ø= 4.1 mm, center distance of 48 mm (the version with 4 holes is also available)
Dimensions:
- External diameter Ø = 59 mm
- Variable height according to the flow-rate from 22 to 26 mm
- Diameter shaft Ø= 7 mm with 2.5 mm drive
- Hub lid diameter Ø= 20 x 4 mm
Technical features:
- Maximum pressure 120 bar
- Capacity from 0.3 to 2 liters / minute at 1400 rpm
- Max standard rotation speed 2800 rpm
Data refer to the following test fluid: oil with viscosity v = 24 cSt and temperature between 15°C and 20°C.